|
Using the black rubber electrical tape, tape around each of the soldered ends, so that no piece of the wires is exposed. Put silicone seal over the end of the audio cable, which connects with the end of the microphone element (these ends should already be soldered and taped). |
 |
Introduction - Page #1 - #2 - #3 - #4 - #5 - #6 - #7 - #8 - #9 - #10 - #11 - #12 - #13 - #14 - #15 - #16 - #17 - Electrical Schematic - Mechanical Schematic |  |
